Search results
Results From The WOW.Com Content Network
CIADDR (Client IP address: 0x00000000) 44 352 YIADDR (Your IP address: 0xC0A80164 or 192.168.1.100) 48 384 SIADDR (Server IP address: 0xC0A80101 or 192.168.1.1) 52 416 GIADDR (Gateway IP address: 0x00000000) 56 448 CHADDR (Client Hardware address: 0x00053C04 0x8D590000 0x00000000 0x00000000) 60 480 64 512 68 544 72 576
Link-local addresses may be assigned manually by an administrator or by automatic operating system procedures. In Internet Protocol (IP) networks, they are assigned most often using stateless address autoconfiguration, a process that often uses a stochastic process to select the value of link-local addresses, assigning a pseudo-random address that is different for each session.
Generally, the aim is to associate the attacker's MAC address with the IP address of another host, such as the default gateway, causing any traffic meant for that IP address to be sent to the attacker instead. ARP spoofing may allow an attacker to intercept data frames on a network, modify the traffic, or stop all traffic.
Anycast is a network addressing and routing methodology in which a single IP address is shared by devices (generally servers) in multiple locations. Routers direct packets addressed to this destination to the location nearest the sender, using their normal decision-making algorithms, typically the lowest number of BGP network hops.
Each 1-bit denotes a bit of the address range which must remain identical to the given IP address. The IP address in CIDR notation is always represented according to the standards for IPv4 or IPv6. The address may denote a specific interface address (including a host identifier, such as 10.0.0.1 / 8), or it may be the beginning address of an ...
On an Internet Protocol (IP) network, IP packets with a destination outside a given subnetwork are sent to the network gateway. For example, if a private network has a base IPv4 address of 192.168.1.0 and has a subnet mask of 255.255.255.0, then any data addressed to an IP address outside of 192.168.1.0–192.168.1.255 is sent to the network ...
The IP address and host name of the BOOTP server. The IP address of the server that has the boot image, which the client needs to load its operating system. When the client receives this information from the BOOTP server, it configures and initializes its TCP/IP protocol stack, and then connects to the server on which the boot image is shared.
The primary router with the highest configured priority will act as a virtual router with a pre-defined gateway IP address and will respond to the ARP or ND request from machines connected to the LAN with a virtual MAC address. If the primary router should fail, the router with the next-highest priority would take over the gateway IP address ...