Search results
Results From The WOW.Com Content Network
A standard-gauge railway is a railway with a track gauge of 1,435 mm (4 ft 8 + 1 ⁄ 2 in). The standard gauge is also called Stephenson gauge (after George Stephenson), international gauge, UIC gauge, uniform gauge, normal gauge and European gauge in Europe, and SGR in East Africa. It is the most widely used track gauge around the world, with ...
The rail profile is the cross sectional shape of a railway rail, perpendicular to its length. Early rails were made of wood, cast iron or wrought iron. All modern rails are hot rolled steel with a cross section (profile) approximate to an I-beam, but asymmetric about a horizontal axis (however see grooved rail below).
Track gauge. The vast majority of North American railroads are standard gauge ( 4 ft in / 1,435 mm ). Exceptions include some streetcar, subway and rapid transit systems, mining and tunneling operations, and some narrow-gauge lines particularly in the west, e.g. the isolated White Pass and Yukon Route system, and the former Newfoundland Railway ...
Track gauge. Originally, various track gauges were used in the United States. Some railways, primarily in the northeast, used standard gauge of 4 ft in ( 1,435 mm ); others used gauges ranging from 2 ft ( 610 mm) to 6 ft ( 1,829 mm ). As a general rule, southern railroads were built to one or another broad gauge, mostly 5 ft ( 1,524 mm ), while ...
Uses of the term. The most common use of the term "track gauge" refers to the transverse distance between the inside surfaces of the two load-bearing rails of a railway track, usually measured at 12.7 millimetres (0.50 inches) to 15.9 millimetres (0.63 inches) below the top of the rail head in order to clear worn corners and allow for rail heads having sloping sides.
Track geometry is concerned with the properties and relations of points, lines, curves, and surfaces [1] in the three-dimensional positioning of railroad track. The term is also applied to measurements used in design, construction and maintenance of track. Track geometry involves standards, speed limits and other regulations in the areas of ...
The standard defines static envelopes for trains on the national network as T, T c and T pr. The static profile 1-T is the common standard on the complete 1520 mm rail network including the CIS and Baltic states. The structure clearance is given as S, S p and S 250. There is a tradition that structure clearance is much bigger than the common ...
The track spacing is the distance between the track centres of double-track railway lines. There are standard distances derived from the standard loading gauge in a country. For high-speed trains and in tighter curves that distance needs to be increased. The track spacing is also called the centre-to-centre spacing to differentiate it from the ...