Luxist Web Search

Search results

1. Results From The WOW.Com Content Network

2. Concrete leveling - Wikipedia

   en.wikipedia.org/wiki/Concrete_leveling

   Once the void under the slab is filled, the pressure builds under the slab, lifting the concrete back into place. Once in place, the holes are filled with a color-matching grout. Benefits of mudjacking: Low-pressure lifting of slab; Finely controlled lifting of the slab; Possible to achieve higher compressive strength than foam leveling; Budget ...

3. Spray foam - Wikipedia

   en.wikipedia.org/wiki/Spray_foam

   Spray foam. Spray foam insulation extruding from a duct. Spray foam (expanding foam in the UK) is a chemical product created by two materials, isocyanate and polyol resin, which react when mixed with each other and expand up to 30-60 times its liquid volume after it is sprayed in place.

4. Foam concrete - Wikipedia

   en.wikipedia.org/wiki/Foam_concrete

   Foam concrete is a versatile building material with a simple production method that is relatively inexpensive compared to autoclave aerated concrete. [1] Foam concrete compounds utilising fly ash in the slurry mix is cheaper still, and has less environmental impact. Foam concrete is produced in a variety of densities from 200 kg/m 3 to 1,600 kg ...

5. Expanded polystyrene concrete - Wikipedia

   en.wikipedia.org/wiki/Expanded_polystyrene_concrete

   Expanded polystyrene (EPS) concrete (also known as EPScrete, EPS concrete or lightweight concrete) is a form of concrete known for its light weight made from cement and EPS (Expanded Polystyrene). It is a popular material for use in environmentally "green" homes. It has been used as road bedding, in soil or geo-stabilization projects and as sub ...

6. Insulating concrete form - Wikipedia

   en.wikipedia.org/wiki/Insulating_concrete_form

   Insulating concrete form or insulated concrete form (ICF) is a system of formwork for reinforced concrete usually made with a rigid thermal insulation that stays in place as a permanent interior and exterior substrate for walls, floors, and roofs. The forms are interlocking modular units that are dry-stacked (without mortar) and filled with ...

7. Precast concrete lifting anchor system - Wikipedia

   en.wikipedia.org/wiki/Precast_concrete_lifting...

   F/n = 23 kN per anchor during initial lift (n = 2 lifting anchors) Transport loads in the yard and on-site. Suction due to casting bed adhesion is not considered, as the calculation takes into account the lifting device dynamic coefficient. S = (W x Ksl x Kd) / n = (64.8 x 1.16 x 1.2) / 2 = 45.1 kN load resistance required per anchor.