Luxist Web Search

Search results

1. Results From The WOW.Com Content Network

2. Thermoforming - Wikipedia

   en.wikipedia.org/wiki/Thermoforming

   Thermoforming is a manufacturing process where a plastic sheet is heated to a pliable forming temperature, formed to a specific shape in a mold, and trimmed to create a usable product. The sheet, or "film" when referring to thinner gauges and certain material types, is heated in an oven to a high-enough temperature that permits it to be ...

3. Poly(methyl methacrylate) - Wikipedia

   en.wikipedia.org/wiki/Poly(methyl_methacrylate)

   Poly ( methyl methacrylate) ( PMMA) is the synthetic polymer derived from methyl methacrylate. It is used as an engineering plastic, and it is a transparent thermoplastic. PMMA is also known as acrylic, acrylic glass, as well as by the trade names and brands Crylux, Hesalite, Plexiglas, Acrylite, Lucite, and Perspex, among several others ( see ...

4. Fibre-reinforced plastic - Wikipedia

   en.wikipedia.org/wiki/Fibre-reinforced_plastic

   Fibre-reinforced plastic ( FRP; also called fibre-reinforced polymer, or in American English fiber) is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass (in fibreglass ), carbon (in carbon-fibre-reinforced polymer ), aramid, or basalt. Rarely, other fibres such as paper, wood, boron, or asbestos ...

5. Carbon-fiber reinforced polymer - Wikipedia

   en.wikipedia.org/wiki/Carbon-fiber_reinforced...

   From these fibers, a unidirectional sheet is created. These sheets are layered onto each other in a quasi-isotropic layup, e.g. 0°, +60°, or −60° relative to each other. From the elementary fiber, a bidirectional woven sheet can be created, i.e. a twill with a 2/2 weave. The process by which most CFRPs are made varies, depending on the ...

6. Compression molding - Wikipedia

   en.wikipedia.org/wiki/Compression_molding

   Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, while heat and pressure are maintained until the molding material has cured; this process is known as compression molding ...

7. Maryland officials release timeline, cost estimate, for ... - AOL

   www.aol.com/news/body-5th-missing-worker-found...

   Maryland plans to rebuild the Francis Scott Key Bridge in just over four years at an estimated cost between $1.7 billion and $1.9 billion, a state transportation official said Thursday. As salvage ...