Search results
Results From The WOW.Com Content Network
v. t. e. The Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable- latency data networks. In operation since before 1985, NTP is one of the oldest Internet protocols in current use. NTP was designed by David L. Mills of the University of Delaware.
The Precision Time Protocol (PTP) is a protocol for clock synchronization throughout a computer network with relatively high precision and therefore potentially high accuracy. In a local area network (LAN), accuracy can be sub-microsecond – making it suitable for measurement and control systems. [1] PTP is used to synchronize financial ...
Clock synchronization is a topic in computer science and engineering that aims to coordinate otherwise independent clocks. Even when initially set accurately, real clocks will differ after some amount of time due to clock drift, caused by clocks counting time at slightly different rates. There are several problems that occur as a result of ...
GPS time synchronization. GPS receiver requirements. Minimum: GPS receiver that works with user chosen software; this requires some combination of GPGGA, GPRMC, GPZDA, GPGSA, and GPGSV sentences. This provides accuracy of between 1 and 2 seconds, and includes most, but not all modern GPS receivers. Better: USB GPS receiver with the NMEA 0183 ...
Clock signal. In electronics and especially synchronous digital circuits, a clock signal (historically also known as logic beat) [1] is an electronic logic signal (voltage or current) which oscillates between a high and a low state at a constant frequency and is used like a metronome to synchronize actions of digital circuits.
Precision Time Protocol (PTP) is a widely adopted protocol for delivery of precise time over a computer network. A complete PTP system includes PTP functionality in network equipment and hosts. PTP may be implemented in hardware, software or a combination of both. PTP is implemented in end systems and in PTP-aware networking hardware.
The "program clock" is a timer that can be programmed with punched paper tape to ring bells or turn machines on and off at preprogrammed times. A clock network or clock system is a set of synchronized clocks designed to always show exactly the same time by communicating with each other. Clock networks usually consist of a central master clock ...
Synchronization takes more time than computation, especially in distributed computing. Reducing synchronization drew attention from computer scientists for decades. Whereas it becomes an increasingly significant problem recently as the gap between the improvement of computing and latency increases.