Search results
Results From The WOW.Com Content Network
2. Check the physical connection - A loose cable or cord can often be the cause of a connection problem. Make sure everything is securely connected to the wall and device. 3. Reboot your modem/router - Sometimes the old "turn it off and on again" approach actually does work! Just wait about five minutes before turning it back on to make sure ...
Dynamic frequency selection. Interference by 5 GHz Wi-Fi seen on Doppler weather radar. Dynamic Frequency Selection ( DFS) is a channel allocation scheme specified for wireless LANs, commonly known as Wi-Fi. It is designed to prevent electromagnetic interference by avoiding co-channel operation with systems that predated Wi-Fi, such as military ...
Wireless LAN (WLAN) channels are frequently accessed using IEEE 802.11 protocols. The 802.11 standard provides several radio frequency bands for use in Wi-Fi communications, each divided into a multitude of channels numbered at 5 MHz spacing (except in the 45/60 GHz band, where they are 0.54/1.08/2.16 GHz apart) between the centre frequency of the channel.
To get cable internet service, you need a modem, and to get Wi-Fi, you need a router. While you can get these separately, you can save even more money (and space) with a modem-router combo, which ...
They do not exist in the official nomenclature. [5] [6] [7] IEEE 802.11 (legacy mode) – or more correctly IEEE 802.11-1997 or IEEE 802.11-1999 – refer to the original version of the IEEE 802.11 wireless networking standard released in 1997 and clarified in 1999. Most of the protocols described by this early version are rarely used today.
v. t. e. Wi-Fi ( / ˈwaɪfaɪ /) [1] [a] is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves. These are the most widely used computer networks, used globally in ...
Wi-Fi 6, or IEEE 802.11ax, is an IEEE standard from the Wi-Fi Alliance, for wireless networks ( WLANs ). It operates in the 2.4 GHz and 5 GHz bands, [8] with an extended version, Wi-Fi 6E, that adds the 6 GHz band. [9] It is an upgrade from Wi-Fi 5 ( 802.11ac ), with improvements for better performance in crowded places.
This Linksys WRT54GS, a combined router and Wi‑Fi access point, operates using the 802.11g standard in the 2.4 GHz ISM band using signalling rates up to 54 Mbit/s. For comparison, this Netgear product, a combined router and Wi‑Fi access point from 2013, uses the 802.11ac standard in the 5 GHz band, with signalling rates up to 6933 Mbit/s.