Search results
Results From The WOW.Com Content Network
A cable modem termination system ( CMTS, also called a CMTS Edge Router) [1] is a piece of equipment, typically located in a cable company's headend or hubsite, which is used to provide data services, such as cable Internet or Voice over IP, to cable subscribers. A CMTS provides many of the same functions provided by the DSLAM in a DSL system.
In a home or small office environment, the default gateway is a device, such as a DSL router or cable router, that connects the local network to the Internet. It serves as the default gateway for all network devices. Enterprise network systems may require many internal network segments. A device wishing to communicate with a host on the public ...
IEEE 802.11ac-2013 or 802.11ac is a wireless networking standard in the IEEE 802.11 set of protocols (which is part of the Wi-Fi networking family), providing high-throughput wireless local area networks (WLANs) on the 5 GHz band. [c] The standard has been retroactively labelled as Wi-Fi 5 by Wi-Fi Alliance.
v. t. e. Wi-Fi ( / ˈwaɪfaɪ /) [1] [a] is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves. These are the most widely used computer networks, used globally in ...
This makes it possible, without the need of a physical Wi-Fi router, to share the wired network access of one computer with wireless clients connected to that soft AP. If an employee sets up such a soft AP on their machine without coordinating with the IT department and shares the corporate network through it, then this soft AP becomes a rogue AP.
Management Data Input/Output ( MDIO ), also known as Serial Management Interface ( SMI) or Media Independent Interface Management ( MIIM ), is a serial bus defined for the Ethernet family of IEEE 802.3 standards for the Media Independent Interface, or MII. The MII connects media access control (MAC) devices with Ethernet physical layer (PHY ...
v. t. e. In IEEE 802 LAN/MAN standards, the medium access control ( MAC ), also called media access control, is the layer that controls the hardware responsible for interaction with the wired (electrical or optical) or wireless transmission medium. The MAC sublayer and the logical link control (LLC) sublayer together make up the data link layer.
An IPv6 network uses an address block that is a contiguous group of IPv6 addresses of a size that is a power of two. The leading set of bits of the addresses are identical for all hosts in a given network, and are called the network's address or routing prefix . Network address ranges are written in CIDR notation.