Leaked Sketch Shows Plans For Power Cruiser From Ducati

by Jeremy Korzeniewski (RSS feed)
Jul 23rd 2010 at 7:01AM

Ducati Power Cruiser sketch – Click above to enlarge

Ducati, an Italian motorcycle manufacturer known for producing some of the highest performing race-bred motorcycles in existence, is apparently looking to branch into new and untapped markets. Evidence of such can be seen in the sketch above, which is said to have been leaked by a dealership that was privy to the company's future plans.

It's expected that Ducati will introduce the world to its power cruiser concept at the EICMA motorcycle show in Italy later this year, but the image above gives us some hints as to what we can expect. First and foremost, a liquid-cooled Testastretta V-twin engine with the Multistrada 1200's 11-degree valve overlap angle will be featured. The mill should pump out 150 or more horsepower and will be controlled by a ride-by-wire system with traction control.

Perhaps the most controversial feature amongst Ducati fans is sure to be the massive rear tire, which is held firmly in place by a single-sided swingarm. Spy shots indicate that the rear hoop may be as wide as a 240, which will certainly have negative effects on the bike's handling characteristics. In contrast, inverted front forks and monobloc calipers are up-level items included up front.

As always, Ducati will use its trademark trellis chassis, and the power cruiser will reportedly sport a reasonable 40-degree lean angle. Stay tuned for more as the EICMA Show gets closer.

[Source: Ducati.ms via Asphalt & Rubber]

Tags: ducati, ducati power cruiser, ducati project 0803, eicma, eicma 2010, motorcycle, motorcycles, power cruiser